Новая версия прошивки v0001-0004
http://www.jrpropo.co.jp/english/dl/details.php?hen=d0428&db_flg=eng_dlUpdates and New Features:
* Bulk model data backup. All model data can be sent to the SD card in one operation, and also restored to the transmitter in one operation.
* Indication of flight mode selection is shown on the throttle and pitch curves. (also, when multi engine mixing is used, the engine selected is displayed)
* Items will now be greyed out when they cannot be selected ? for example, flight mode or analogue position switches if they are not defined.
* The switch select logic (on or off) will be highlighted in red.
* When travel adjust is set over 150%, it will be highlighted in red as a warning.
* An error message will be displayed if an app is added to the home screen which is not able to use on the current model type.
* On curve screens, any trim input switch is indicated on the screen.
* Improvement of battery charge remaining confirmation prior to software updates.
* Addition of French & Spanish languages.
* Trim system: If an analogue trim was being used and is then disabled (under switch select), the current trim values are automatically saved.
* Airplane mode, trim system: The default trim system has been changed to common (rather than set by flight mode).
* To force a fully shutdown, first turn off the transmitter (it will actually be in standby for the next 3 hours). Then briefly press the power button to turn the transmitter on. As soon as the LED turns orange, immediately press the power button again. This will force a full shut down of the transmitter. So the next time it is turned on, it will be a full cold boot.